User Manual
The Harvest Home App
what is the harvest home app? the harvest home app provides visibility on system operation, performance, and control over some system settings, such as wifi changing the wifi network time of use changing the time of use schedule that the system optimizes for hot water reserve updating the hot water reserve level that the system will try to maintain even at high price hours full charge fully charging the tank ahead of emergency high demand events the harvest home app does not replace your thermostat or smart thermostat app the thermostat is still your primary interface to control your home heating and cooling the harvest home app gives you access to data and system settings that determine how your harvest system responds to your thermostat and hot water usage accessing the harvest home app the harvest home app is a web app hosted on the harvest pod it is accessible on the local network that your pod is connected to it is not accessible from the internet outside of your home connect your phone/tablet/laptop to your local network (wifi or ethernet) in most cases, your home has a single network however, if you have multiple local networks, make sure to connect to the same network that the harvest pod type " http //harvestpod nnnn local " in an internet browser address bar, where "nnnn" is the four digit serial number printed on the label underneath your harvest pod also note the password printed on the same label, and use it to unlock the page when prompted use the “ user settings, data & control ” button using the “system setup (advanced)” section can risk losing your commissioned settings and making your system inoperative troubleshooting if http //harvestpodnnnn local doesn’t work, it means that your router does not support multicast dns if you know how to find the ip address of the harvest pod on your network, use http //\[your ip address] instead if you do not know how to find your ip address, ask us at support\@harvest thermal com and we will help you